Part:045X333
The Fluke 175 Digital Multimeter is an easy-to-use True RMS DMM was specifically made for front-line industrial, electrical, and electronic technicians. Measures ac/dc voltage to 1000V, current to 10A, resistance to 50MΩ, capacitance to 10,000 µF and frequency to 100 kHz. Click on the SPECIFICATIONS tab for complete specs.This True RMS digital multimeter comes supplied with TL75 test leads, installed 9V battery and user manual.
Introducing the Fluke 175 true-rms digital multimeter with 0.15% basic dc voltage accuracy. This tough, accurate and powerful tool is designed specifically for front-line industrial, electrical and electronic technicians and engineers. It was developed for use in environments that range from relatively clean bench areas to some of the harshest work environments known to man. In addition to performing as the primary meter for many technicians and engineers, the basic yet versatile 175 is also within the price range of the growing consumer segment of occasional users and do-it-yourselfers who require a quality, feature-rich DMM. You get Fluke quality with innovative, easy-to-use new features.
Fluke built the 175 from the ground up, based on extensive research into what its broad range of users requires in a DMM. Research clearly shows that users want the impossible: an affordable, high-performance, feature-rich multimeter that is easy to use. And that's just what they get with the 175. It was tested at beta sites to ensure it surpassed expectations under real-life work conditions. Equipment being tested is getting bigger and so are testing requirements. This rugged meter survives being on the floor, on the engine and on the bench. Just plug it in, slap it in place and walk away.
Backed with a lifetime, worldwide warranty, this DMM features an exclusive Fluke-designed true-rms engine, 0.15% accuracy with 6000 counts of resolution on a digital display that updates four times a second. In addition, this meter offers a Min/Max/Avg mode for enhanced troubleshooting and impressive speed as the display powers up and presents measurement readings instantly.
Fluke engineers designed this DMM for the most demanding testing jobs. It provides V ac range from 0.1 mV to 1000 V as well as frequency range from 2 Hz to 100 kHz. Fluke also extends the capacitance ranges beyond that typically found in a meter at this price level. With a range from to 1 nF to 9999 µF, it provides a broad spectrum of measurement readings needed by technicians and engineers working on electric motors and other equipment. While operating in the Min/Max/Avg mode, the meter emits an audible tone to signal that a new minimum or maximum reading has been sensed and stored. Users can select response time (the minimum time a signal must be present to be recorded) between 100 milliseconds and 1 second.
One of the key features of this DMM is its innovative, ergonomic tapered-case design. It incorporates an overmolded, soft polyurethane bonded to a hard polycarbonate alloy case structure. With this high-impact overmolding technology, a shock load is dispersed over a greater area of the case. In addition, the rigid structure minimizes case flex, which in turn reduces stress on the electronics inside the unit. Outside the case, the standard-issue probe holders are conveniently integrated into the overmolding. The end result is a DMM with superior durability, utility and product life. An innovative battery access door allows the user to change the batteries with a standard screwdriver without breaking the calibration seal. In addition, the closed-case calibration feature allows calibration adjustments to be made directly from the front panel.
Fluke has long focused on safety in all its products and has sought industry-wide protection measures to help ensure safe working conditions and product specifications for electrical technicians. This new meter complies with the EN61010 Second Edition standard which addresses CAT IV overvoltage requirements. All inputs are designed to withstand an impulse voltage in excess of 8 kV which complies with CAT IV 600-V requirements.
Includes built-in probe holders, TL75 test leads, 9-volt alkaline battery, holster and manual. This 1.5-pound unit is 6.25" x 3.25" x 9.2" Lifetime warranty.
Click here to view Detailed Product Specifications for 045X333 (PDF format).
Download Free Acrobat Reader Here
Usually ships same day
Shipping Time
-
- FedEx IP: Within 1-4 business days
- FedEx IE: Within 4-6 business days
- DHL: Within 2-6 business days
- EMS: Within 4-15 business days
- UPS: Within 1-3 business days
- Hong Kong Post Airmail: Within 10-30 business days
-
Payment:
-
- Paypal or Credit/debit card
Wire Transfer, West Union
-
Returns:
-
- Satisfactory return or item exchange
-
Guarantee:
-
- Money back guarantee
-
Warranty:
-
- Limited Warranty
-
Volume pricing:
-
- If you need large order volume, please apply for a Business Account or Contact Us to enjoy preferential policies.
-
-