Part:770X215
The Triplett Byte Brothers LVPRO3 Low Voltage PRO Model 3 is an accurate handheld tester that is easy to use and versatile. It features Length-RLQ which adds a length readout as well as 12 applications: Wall Jack ID, Cable Test Pack, Speaker 7.1 ID, Speaker Pop, Port Blink, Toner Locator and Alert LEDs, 10/100/100 detection, PoE Volts, Phone Volts, CCTV Signal, Battery Load and Print Results. The LVPRO 3 includes a remote unit, 2-Cat 6 patch cables, 2-RJ45/alligator clips adapters, Upgrade/Printer/PC USB cable , 9V battery, user's manual and a case.
The Byte Brothers™ LVPR3 Low Voltage PRO Model 3 Cable/Device Tester is a handheld testing device that can be used to test low voltage installations such as alarms, CCTVs, VoIP phones, IP cameras, and audio devices. The LVPRO3 comes pre-equipped with a cable testing pack which provides the user with a cable diagram, pass/fail test, delay, skew, and ohm measurements. This device also comes with twelve applications installed to help the user increase testing functionality, and can be upgraded to obtain more features. The Model 3 also carries the Length-RLQ pack which uses built-in VOP values or calibrated values to provide length readouts to the cable testing app. The app also tests for load mismatches that affect the wire?s power and data transfer capability. The tone locator app allows users to place a tone on one end of the cable and detect it on the other end with the help of a separate remote tone probe. Port blink allows the user to locate a cable connection to a switch port by blinking the switch?s link LED. The speaker popper app allows speaker location by making them perform a short audible pop. The SPKR 7.1 ID# mapper is an app specifically designed to properly map and label A/V speaker wires and requires a remote kit to use. Wall jack mapping can ID or test RJ45 or coax installations in one go with the help of smart remotes and a specific kit. The tester also has both 10/100/100 and PoE detection apps. This model also carries a CCTV peak to peak voltage app as well as a phone voltage app for testing connections to central offices. Additionally, this low voltage testing device has a loaded battery test app and contains a printing app which allows storage of up to 250 reports for printing. The LVPRO3 also has alert LEDs for all installations where two LEDs quickly alert the user of an active switch connection or voltage on the line.
The Byte Brothers™ LVPRO3 Low Voltage PRO Model 3 Tester includes the main unit, RJ45/Alligator Clip adapters, patch cable, USB report transfer cable, printing app, zippered pouch, and a 9V battery.
Click here to view Detailed Product Specifications for 770X215 (PDF format).
Download FreeAcrobat Reader Here